My Doodling With Debby video series this month came about after messaging with my sister the other day. She asked if I was going to do a tartan heart card for Valentine’s and that sparked this card! I know Valentine’s has been and gone but I chose a sentiment that could be used all year round, anniversary anyone? I kept the card clean and simple and used minimal supplies, so this is a card you can knock up at any time. I’ve linked all supplies at the end of this post. Compensated affiliate links used where possible at no cost to you.

VIDEO

Watch below or in HD on YouTube.

Simple Watercoloured Tartan Heart Minimal Supplies

I’ve watercoloured various plaids and tartans over the years. I call this pattern a tartan, but I think the correct term is a plaid as the pattern has a randomness to it whereas a tartan is more uniform in design. Regarding colour palettes, my favourite is a classic red, light grey and dark grey combination. I worked out the colours to use and mixed those into three wells of a palette. I used Arches Cold-Pressed watercolour card and two sizes of flat brush. Flat brushes make life easier for painting strips, but you can use any brush by painting the bordering lines of a stripe and then fill in the gaps. Use what you have to hand is the best thing.

I taped my piece of card to a board to prevent warping, but also to aid in painting the stripes. I find that when I first place my brush down, I’m not into the flow of the stroke and my bristles are not uniformly flat. So, by starting off the paper first and getting the brush how I want it to be, I get a more consistent stripe width. The key here is to go slow and steady. For each stripe, I painted across the paper at a diagonal once and then evened out the line by painting it a second time. The larger of the two flat brushes holds plenty of water, and it wasn’t a problem to paint the whole stripe without refilling my brush. However, for the smaller brush, I often ran out of paint part way, and my tip here is that once you’ve refilled your brush you start back in on an area already painted and that way you will have a more consistent stripe and flow of paint through the stripe. I painted the stripes in a random order of brush widths and colours and also gaps between the stripes. Just remember that if you butt one stripe up against another then the first stripe has to be fully dry or the colours will bleed together and for that, I just made sure to hit any stripes with my heat gun before painting the next one. I finished painting stripes across the panel in one direction and then dried it thoroughly with my heat gun before moving on to the stripes in the other direction. I also made sure to wipe away any excess paint from the masking tape at this point as I didn’t want these blobs of colour to get pulled across the paper once I started in the other direction.

I’ve not talked about the colour media I used yet – Daniel Smith watercolours. However, any water-based media would work. You could colour the stripes with brush markers, re-inkers or squidge water-based inks onto a mat and pick up the colour with a brush – use what you have at hand. You don’t even need to use water-based media. You could colour the stripes with pencils or weave strips of card together to create a pattern. Once I’d finished the second set of lines, I dried the panel with my heat tool again and then lifted the painter’s tape, and this is always a favourite part as that blue tape is somewhat distracting. However, it is the best I’ve found and lifts easily too without tearing the paper. I added detail to the stripes with a white gel pen. I love using a white gel pen, but there is a bit of a knack to using one. First, go slow and let the gel flow! If the pen is jumping, then warm the ink up a little by scribbling on your hand to get it flowing again. When drawing these stripes on, I found that slow, steady back and forward motions gave the best results. Once dry, you can always go back in and fill in any gaps if necessary but don’t try doing that while the ink is still wet, or it just seems to lift ink off rather than depositing more.

This panel would make an excellent background for a card, but I used the Nested Hearts dies from Simon Says Stamp. I chose one of the dies which would fill a card front nicely and then chose the area I wanted to cut the die. I then ran that through my die cutting machine. I’ll keep the rest of this panel to use on another card. In fact, I did use a little of it to accent a matching envelope to go with the card.

I used a Wonky Rectangles die to add a stitched detail around a piece of Ivory card on which to mount the heart. I used foam squares generously over the back of the heart and then 3M foam tape over the back of the Ivory panel. I mounted the panel to a card base cut and scored from Fog card from Simon Says Stamp. One of my favourite ways to add a sentiment to a card is on a skinny black strip with white heat embossing, and so I’m enjoying the new sentiment strips from Cathy Zielske. Being pre-printed, they are so simple to cut up and add to your card, and each pack comes with a range of greeting options. I chose the Always & Forever sentiment and cut that with a ruler and a craft knife. I added foam tape to the back of the strip and then used a T-square ruler to make sure I had it on straight. I then used a trio of Pink & Main glossy silver dots to accent around the sentiment. I like these dots as they add a bit of bling while toning with everything.

I was excited to see the new envelope dies in the recent Simon Says Stamp release. I used the A2 V flap one, and I love that you can cut an envelope from whatever card you want. I cut the main panel and two of the side triangle pieces from Ivory card and added score-tape to the back of the flaps before lining them up to create the body of the envelope. I then added more tape to the sides of the bottom flap and folded it up to complete the envelope. I took a skinny strip of my watercolour pattern and added that down the side of the front for a pop of matching colour. So, there you have it a clean and simple card with a watercoloured tartan heart and matching envelope. This card would be great for Valentine’s, but also, it would work well for an anniversary too.

SUPPLIES

You can find links to the supplies I’ve used below; click on the picture or shop icon to get taken directly to the product. Where available I use compensated affiliate links which means if you make a purchase I receive a small commission at no extra cost to you. Thank you! Items marked with an asterisk (*) provided by a store or the manufacturer. You can read my affiliate and product disclosure here. I genuinely appreciate your support.

* SSS NESTED HEARTS Wafer Dies [ SSS ] * SSS WONKY RECTANGLES Wafer Dies [ SSS ] * SSS A2 V FLAP ENVELOPE Wafer Die [ SSS ] * CZ Designs SENTIMENT STRIPS REVERSE… [ SSS ] Daniel Smith at Simon Says STAMP! [ SSS ] Arches COLD PRESSED WATERCOLOR PAD [ SSS ] Daniel Smith QUINACRIDONE CORAL [ SSS ] Daniel Smith ALIZARIN CRIMSON [ SSS ] Uni-Ball Pen Signo Gel WHITE Pen [ SSS ] Pink and Main SILVER Glossy Dots [ SSS ] SSS IVORY Card [ SSS ] SSS FOG Card [ SSS ] Crafter’s Companion CRAFT KNIFE [ SSS ] T SQUARE RULER [ SSS ] PAINTER’S TAPE [ SSS ] Scrapbook Adhesives WHITE FOAM Squares [ SSS ] Scor-Tape 1/4 Inch Crafting Tape [ SSS ] 3M DOUBLE-SIDED FOAM TAPE [ SSS ] SSS SMALL TEFLON BONE FOLDER [ SSS ] Tim Holtz Tonic GLASS MEDIA MAT [ SSS ] Tim Holtz Tonic GUILLOTINE [ SSS ] Scor-Pal Mini Scoring Board [ SSS ] EK Success CUTTER BEE Scissors [ SSS ] Crafter’s Companion GEMINI JUNIOR… [ SSS ]

PIN ME

Summary of the project which gives all the views of the card in one photo :D I’d love if you pinned and called by on Pinterest :D